EXPLOSION-PROOF INTERCOM STATIONS
INTERCOM STATIONS
EXPLOSION-PROOF INTERCOM STATIONS
Digital Explosion-proof Intercom Station
DA/DAE 7x5
Previous
Next
Features and Functions
- For use in explosive (hazardous) areas of Ex zone 1 and 2
- certificated by ATEX and IECEx
- Temperature range of DX series: -40 °C to +70 °C
(-40 °F to +158 °F) - Degree of protection IP66
- Configurable and programmable user controls: dial keypad and momentary rocker switch
- Designed for use with industrial gloves
- Visual call or busy status via LED
- Noise-compensating microphone with dynamic compression
- Adjustable speaker volume and microphone sensitivity
- One internal potential-free relay contact
- Width x height x depth: 141 mm x 484 mm x 171 mm (5.55″ x 19″ x 6.73″)
Ex Handset with Cradle
1 DAH 01
Features and Functions
- Lightweight, handy and easy to operate
- Reliable fixture
- Degree of protection IP66
- Duplex or half-duplex operation
- Automatic hook-off detection
- Width x height x depth:
154 mm x 221 mm x 105 mm (6.06″ x 8.70″ x 4.13″)
Ex Headset
1 DHUX 01
Features and Functions
- Headset for Ex zones 1 and 2
- Headset capsules allowing use in noisy areas
- Microphone with flexible boom
- Conversation control via external PTT key
- Snap-in connector
Explosion-proof Foot Switch
1 FSX 21
Features and Functions
- One-pedal non-latching Ex foot switch
- Suitable for Ex zone 1, 2, 21 and 22
- Robust aluminum die-cast enclosure with protective shield
- Slow action with double break, positive break
- 1 NC / 1 NO contact
- Pre-wired cable
- 3 meters of cable length
- Width x height x depth: 156 mm x 138 mm x 265 mm (6.14″ x 5.43″ x 10.43″)
Acoustic Hood for Explosive (Hazardous) Areas
2 SSH 16
Previous
Next
Features and Functions
- Acoustic hood of powder-coated stainless sheet steel for use in Ex zone 1, 2, and 22
- Flame-retardant insulation
- Up to 30 dB noise reduction
- Suitable for use with INDUSTRONIC intercom stations of the DA(E)/DX(E) 0x5, DA(E)/DX(E) 7×5 and NRO xx2 series
- Width x height x depth: 650 mm x 900 mm x 535 mm (25.59″ x 35.43″ x 21.06″)
Free-standing Mounting Post
18 DSO 05
Previous
Next
Features and Functions
- For free-standing mounting of INDUSTRONIC intercom stations of the DA(E)/DX(E) 0x5, DA(E)/DX(E) 7×5 as well as of the NRO xx2 series
- Cable entry at the bottom
- Ideal for gates or entrance areas
- Can be combined with acoustic hood
- Additional signaling devices can be mounted
- Width x height x depth of post:
170 mm x 1780 mm x 90 mm (6.69″ x 70.08″ x 3.54″) - Width x height x depth of base:
243 mm x 5 mm x 208 mm (9.57″ x 0.20″ x 8.19″)